Pride Mobility Victory Series Manual page 32

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
7. Turn the tiller adjustment lever counterclockwise until it is loose. Pull the rubber boot upward to expose the
tiller release buttons. Place one hand on the rear of the tiller and carefully depress both tiller release buttons
while slowly lowering the tiller to the center of the floorboard.
8. If your Scooter is equipped with a handbrake, disconnect the handbrake cable from the rear hub by pushing
forward and holding the brake release lever with your thumb. See figure 21. Lift the cable release hook free of
the peg and slide the handbrake cable free of its slot on the brake mount. See figure 21a. Move the cable safely
out of the way.
PUSH BRAKE RELEASE
LEVER FORWARD
Figure 21. Disengage Handbrake
9. Lift the cam lock levers to the unlocked (vertical) position and remove the locking pin from the frame. See
figures 22 and 23.
10. Push forward, then pull up on the manual freewheel lever to make it easier for you to maneuver the rear section.
11. Place one hand on the seat pedestal and one hand on the front frame handle; gently slide the front and rear
sections apart. See figure 23.
UNLOCK CAM LOCK LEVERS
Figure 22. Unlock Cam Lock Levers
32
LIFT UP THE CABLE
RELEASE HOOK
BRAKE MOUNT
Figure 21a. Disengage Handbrake
REAR PEGS
LOCKING BRACKET SLOTS
Figure 23. Front and Rear Section Connections
HANDBRAKE CABLE
FRONT FRAME
HANDLE
REMOVE BALL DETENT PIN
Victory