Assembly Instructions - Pride Mobility Quantum Q6 Edge 2 Installation Instructions Manual

Assemble the Docking System onto the power base. Additional spacers (not included) can be
1
applied if necessary to achieve the desired clearance.
Test that the proper clearance is achieved by connecting to the docking station.
2
If screw threads protrude through the nut, flush mark the screws to the top of the nuts.
Disassemble the system and cut the marked screws with a grinder or hacksaw.
3
Threads protruding through the nut may damage batteries.
Apply Loctite 222 (or equivalent) to the screws and reassemble the Docking System onto the
4
power base. Torque the hardware to
The new hardware provided with the Installation Kit MUST be used for installation.
1
Just the main frame
is shown for clarity.
Optional Spacers
(Not Included)
3
Section 1: Assembly Instructions
per Dahl Engineering
Custom
Nuts
Spacer
Lock
Plate
Torx
18 N • m (13.3 ft • lb).
2
4
Just the main frame
is shown for clarity.
Torque to
4
18 N • m (13.3 ft • lb)
5
Custom
Nuts
Spacer
Lock
Plate
Torx