Advertisement
Fitting and removing the sliding shelf supports
Compact ovens only: The sliding shelf supports cannot be used on shelf positions 3 and 4.
To fit
1. Ensure the slides are the correct way around (the front of the slide has the triangular shaped tab as shown).
2. Fit the top of the clips over the side rack, the front clip should be fitted as close to the front of the side rack as
possible. Make sure the rear clip has engaged.
3. Rotate the slide down and 'click' the bottom of the clips into place.
To fit
1. Ensure the slides are the correct way around (the
front of the slide has the triangular shaped tab as
shown).
2. Fit the top of the clips over the side rack, the front
clip should be fitted as close to the front of the
side rack as possible. Make sure the rear clip has
engaged.
3. Rotate the slide down and 'click' the bottom of the
clips into place.
https://producthelp.fisherpaykel.com/eu/Cook/Built-In_Ovens/Single/OB60SC9DEX1/User_Guide_OB60SC9DEX1/12_Care_...
Updated: Sat, 15 Feb 2020 09:47:27 GMT
Powered by
9
Advertisement
