Fisher & Paykel OB60SC9DEX1 Care And Cleaning page 5

Hide thumbs Also See for OB60SC9DEX1:

Removing the side racks and the catalytic panels (some models only)

Always turn off the oven at the wall first. Ensure the oven has cooled down completely

before starting.

Remove all shelves

1. Slide out all shelves and remove.

For easier access we recommend removing the

oven door. See

'Removing and refitting the oven

door'.

Remove both side racks (and catalytic panels if fitted):

1. Unscrew and remove the fixing nut at the front of the side rack. Use a coin to loosen the nut if necessary.

2. Pull the side rack toward the center of the oven until the front tab is clear of the fixing nut. If catalytic panels are

fitted remove them at the same time (pull the panel toward the centre of the oven along the side rack).

3. Slide the side rack (and catalytic panel if fitted) forward until the rear prongs are clear of the holes.

4. You may now slide the catalytic panel off the side rear prongs.

https://producthelp.fisherpaykel.com/eu/Cook/Built-In_Ovens/Single/OB60SC9DEX1/User_Guide_OB60SC9DEX1/12_Care_...

Updated: Sat, 15 Feb 2020 09:47:27 GMT

Table of Contents