Advertisement
When replacing the glass panes make sure that
• you replace the inner pane correctly as shown. The pane must be in the position described below in order to fit into
the door and to ensure that the oven operates safely and correctly
• you take extra care not to bump the edges of the glass against any object or surface you do not force any of the
panes into place. If you are experiencing difficulties replacing the panes, remove them and start the process again
from the beginning. If this still does not help, call Customer Care.
Replace the middle pane
Ensure the pane is the right way up (the black strip and
warning text at the bottom of the pane should be
readable back to front when the pane is fitted correctly).
1. Ensure the rubber stoppers are still attached at the
top to the pane.
2. Slot the bottom of the pane into the lower notch at
the bottom of the door.
3. Lower the pane into the door, the rubber stoppers
rest on the outer pane of glass.
Replace the inner pane
Ensure the pane is the right way up
(ie the logo should be readable at the bottom of the door)
4. Slide the pane into the notch at the bottom of the door.
5. Lower the pane onto the notch at the top of the door.
6. Slide the glass retainer back into place and ensure it is fully clipped securely in place.
Make sure the glass retainer is correctly and firmly in place and the glass pane is secure.
https://producthelp.fisherpaykel.com/eu/Cook/Built-In_Ovens/Single/OB60SC9DEX1/User_Guide_OB60SC9DEX1/12_Care_...
Updated: Sat, 15 Feb 2020 09:47:27 GMT
Powered by
19
Advertisement
