Table of Contents
Advertisement
3. Pull the blade appliance out of the bay.
4. Place either a blade filler or another blade device in the blade server bay within
Removing the expansion unit
Use these instructions to remove the expansion unit from the blade appliance.
To remove the expansion unit, complete the following steps:
1. Before you begin, read "Safety statements" on page vii and "Installation
2. If the blade appliance is installed in a BladeCenter unit, remove it (see
3. Carefully lay the blade appliance on a flat, static-protective surface, with the
4. Press the expansion unit release on each side of the blade appliance and lift the
5. Rotate the expansion unit open; then, lift the expansion unit from the blade
6. If you are instructed to return the expansion unit, follow all packaging
one minute.
Expansion unit
Expansion
unit release
Expansion
unit release
guidelines" on page 13.
"Removing the blade appliance from the BladeCenter unit" on page 18 for
instructions).
expansion unit side up.
expansion unit from the blade appliance.
appliance.
instructions, and use any packaging materials for shipping that are supplied to
you.
Chapter 3. Installing and removing the blade appliance
19
Advertisement
Table of Contents
