Table of Contents
Advertisement
To check for updated documentation, go to http://www.ibm.com/software/
integration/datapower/library/documentation/. You can obtain other up-to-date
information about the blade appliance at http://www.ibm.com/systems/
bladecenter/.
You can subscribe to information updates specific to your blade appliance at
http://www.ibm.com/support/mynotifications.
The model number and serial number are on the ID label on the side of the control
panel on the front of the blade appliance, and on a label on the side of the blade
appliance that is visible when the blade appliance is not in the BladeCenter unit.
Note: The illustrations in this document might differ slightly from the hardware.
Release
buttons
A set of blank labels comes with the BladeCenter unit. When you install the blade
appliance in the BladeCenter unit, write identifying information on a label and
place the label on the BladeCenter unit bezel. See the documentation for your
BladeCenter unit for recommended label placement.
Important: Do not place the label on the blade appliance itself or in any way block
the ventilation holes on the blade appliance.
2
IBM WebSphere DataPower Integration Blade XI50B Type 4195: Installation and User's Guide
Expansion unit
Release
handle
Release
handle
Advertisement
Table of Contents
