Table of Contents
Advertisement
Replaceable components are of three types:
v Consumable parts: Purchase and replacement of consumable parts (components,
v Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
v Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or
v Field replaceable unit (FRU): FRUs must be installed only by trained service
For information about the terms of the warranty and getting service and assistance,
see the Warranty and Support Information document.
Index
Description
1
Expansion unit
2
Heat sink, microprocessor
3
Microprocessor 2.13 GHz/800MHz-4MB 80W (quad core)
4
Memory, DIMM filler
5
Memory, 2 GB VLP DDR3-1333
6
Front bezel
7
Control panel (front bezel)
8
Hard disk drive, 2.5 inch hot-swap SAS 300 GB, 10 K
9
Hot-swap storage-bay filler
Blade appliance base assembly (includes the system board
10
without a microprocessor with firmware image)
Alcohol Wipe Kit
Thermal grease
Kit, miscellaneous parts (all models)
11
Battery, 3.0 volt (all models)
12
USB key, 4 GB image
Note:
1. When a failed blade appliance base assembly (10) is replaced, the USB key (12)
2. You can replace a failed USB key (12) without replacing the blade appliance
3. The IBM WebSphere DataPower Integration Blade XI50B blade appliance base
32
IBM WebSphere DataPower Integration Blade XI50B Type 4195: Installation and User's Guide
such as batteries and printer cartridges, that have depletable life) is your
responsibility. If IBM acquires or installs a consumable part at your request, you
will be charged for the service.
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
technicians.
Note 2, Note 3
must also be replaced. Both of these parts must be ordered separately. See Note
3 for additional information about configuring the replacement blade appliance
base assembly and USB key.
base assembly (10). See Note 3 for additional information about configuring the
replacement USB key.
assembly is tied to its USB key through a cryptographic security mechanism.
When the USB key is replaced, either alone or as part of a blade appliance base
assembly replacement, the two components are automatically tied together and
CRU part
number
(Tier 1)
68Y7487
60H2962
49Y1439
46D1141
46D1120
42D0638
44T2248
Note 1
33F8354
46M6745
CRU part
FRU part
number
number
(Tier 2)
46C3545
46D1270
81Y9291
59P4739
41Y9292
46D1122
Advertisement
Table of Contents
