Changing The Volume Balance For Acoustic Layering; Playing Two Sounds Together (Dual Performance); Adjusting The Volume Balance In Dual Performance (Dual Balance) - Roland HPE109-PE Owner's Manual

HP109-PE – Chapter 2. Performance
I Changing the Volume Balance for Acoustic
Layering
You can adjust the balance in volume between the two
selected tones when performing with Acoustic Layering.
When the volume balance is changed with Acoustic Lay-
ering in effect, the Dual Balance also changes to the same
volume balance settings (p. 20).
1. Hold down the [Acoustic Layering] button and
press the [-] or [+] button.
The volume balance changes.
To return to the original volume balance, press the [-] and
[+] buttons simultaneously.
Volume of the Piano tone Volume of Layer Tone
Playing Two Sounds
Together (Dual Performance)
Simultaneously playing two tones when one key is pressed is
called "Dual performance." You can select the tone you want
to have layered by pressing the corresponding tone button.
1. Simultaneously press the two Tone buttons that
you want to play together.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two Tone
buttons you selected will sound simultaneously.
To cancel Dual performance, press any Tone button.
To change the tone of the right button of
the two selected tones
2. Press the [-] or [+] button.
Dual performance now features the tone of the left side's
tone button along with the newly selected tone.
You can change the pitch of the tone of the right button
in octave steps (p. 31).
To change the tone of the left button of the
two selected tones
Cancel the Dual performance, and then re-select the tone.
Press the two Tone buttons that you want to play together.
20
I Adjusting the volume balance in Dual perfor-
mance (Dual Balance)
You can change the volume balance between the two lay-
ered sounds in Dual performance.
1
You can save this setting in the HP109-PE's memory
using the Memory Backup function (p. 32).
1. Hold down the [Transpose] button, and press the
[Split] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
2. Press the [-] or [+] button to change the value.
The volume balance changes.
You can also change the volume balance by holding
down the [Acoustic Layering] button and pressing the
[+] or [-] button.
To return to the original volume balance, press the [-] and
[+] buttons simultaneously.
Volume of the left button tone
Press any button other than the [-] [+] buttons, and the but-
ton's indicator will return to the previous state.
2
Volume of the right button tone