Important: Changes and Precautions after Switching the Ink
Change: Cleaning Locations During Manual Cleaning
Clean the locations indicated in the following figure when performing manual cleaning after switching to MAX 3 ink.
Exercise special care in wiping off any accumulated ink. You can make the accumulated ink easier to clean off by applying
cleaning liquid to the cleaning locations, and then wiping these locations off with the cleaning stick. Only moisten the part
indicated with diagonal lines in location
A
Also carefully clean the sides of the print heads.
During this work, be careful not to touch the print head surface (nozzle surface) directly with the clean-
ing stick.
20
ECO-SOL MAX 3 Ink Switching Method
A
with cleaning liquid on the cleaning stick.
Area to clean
Area to moisten