Step 7: Updating Versaworks - Roland SOLJET PRO4 XR-640 Manual

STEP 7: Updating VersaWorks

1.
Update VersaWorks.

Refer to http://www.rolanddg.com/ecosolmax3/ and update VersaWorks to a version that supports
MAX 3 ink.

If VersaWorks is running, exit it.
From this point, the procedure differs depending on the type of printer that is connected
to VersaWorks.
When only a printer that has been switched to MAX 3 ink is connected to VersaWorks
(P. 15 )
Initialize VersaWorks, and then reconnect the printer to it as a new printer. All the information will be deleted
due to the initialization. We recommend that you write down the IP address of the printer that you will
reconnect and the settings of the VersaWorks application that you want to continue to use.
When a printer that does not use MAX 3 ink is connected to VersaWorks (P. 17 )
Leave the printer that does not use MAX 3 ink connected (leave the information set in VersaWorks). Only
reconnect the printer that has been switched to MAX 3 ink as a new printer. All the information of the newly
reconnected printer is deleted (the information of the printer that does not use MAX 3 ink remains), so we
recommend that you write down the IP address of the printer that has been switched to MAX 3 ink and the
settings of the VersaWorks application that you want to continue to use.
When only a printer that has been switched to MAX 3 ink is connected to VersaWorks
2.
Initialize VersaWorks.

Windows VISTA/7
Click the [Start] (
Click [All Programs] (or [Programs]) > [Roland VersaWorks] > [Initialize Application].
Windows 8
Right-click in the [Start] screen.
Click [All apps].
Click [Initialize Application] for VersaWorks.
Windows 8.1
Click on the [Start] screen.
Click [Initialize Application] for VersaWorks.

) menu.
When the message shown in the figure is
displayed, click [Yes].
ECO-SOL MAX 3 Ink Switching Method
Switching the Ink
15