Name
filterDataAvailable
Inventoried
TAG_DATA[2]
...
TAG_DATA[n]
Indicates whether the filter criteria could be read.
1)
Indicates how often the transponder was identified via the air interface before it changed to the "Observed" status.
2)
9.5.2.3
Read_EPC_Mem
The "Read_EPC_Mem" block reads data from the EPC memory of the RF600 transponder.
Access is to bank 1 as of the start address 4. The length of the EPC memory to be read out
is specified by the "LEN_DATA" parameter.
Figure 9-10
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
Type
Comment
BYTE
0=false; 1=true
WORD
2)
IID_IN_1_81
...
IID_IN_1_81
"Read_EPC_Mem" block
Programming via Rockwell controller
9.5 Programming add-on instructions
1)
171