Table of Contents
Advertisement
Figure 5 1U chassis rail and long slide rail
1
(1) Chassis rail
Rack-mounting procedures at a glance
Figure 6 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
Follow these guidelines when you install the switch in a 19-inch rack:
•
The distance between the front and rear posts of the rack must meet the requirements
described in
•
To secure the switch to the rack, you must install not only mounting brackets, but also chassis
rails and slide rails.
Table 4 Distance requirements between the front and rear rack posts
Switch model
S6861-54QF
S6861-30QF
2
Table
4.
Installation method
Using mounting brackets, chassis
rails, and long slide rails
Using mounting brackets, chassis
rails, and super-short slide rails
(narrow-spacing installation)
Using mounting brackets, chassis
rails, and super-short slide rails
(wide-spacing installation)
(2) Long slide rail
Minimum distance
between the front
and rear rack posts
621 mm (24.45 in)
330 mm (12.99 in)
438 mm (17.24 in)
6
Maximum distance
between the front
and rear rack posts
793 mm (31.22 in)
505 mm (19.88 in)
632 mm (24.88 in)
Advertisement
Table of Contents
