Table of Contents
Advertisement
Table 13 Fiber management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and max
transmission distance
Functions and services
Table 14 FE SFP transceiver modules
FE SFP transceiver
module
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
SFP-FE-LH40-SM1310
USB port
The switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the Flash of the switch, for
example, to upload or download application and configuration files.
NOTE:
USB devices from different manufacturers vary in compatibilities and drivers. H3C does not
guarantee the correct operation of all USB devices on the switch. If a USB device fails to operate on
the switch, replace it with one from another manufacturer.
SFP+ port
The S6861-54QF and S6861-30QF switches provide SFP+ ports. The following transceiver modules
and cables are available for the SFP+ ports:
•
Gigabit SFP transceiver modules in
S6861-54QF switch do not support Gigabit SFP modules.
•
10-Gigabit SFP+ transceiver modules in
•
10-Gigabit SFP+ copper cables in
•
10-Gigabit SFP+ fiber cables in
Specification
LC
1
100/1000 Mbps, full duplex
See
Table 14
Software upgrade and network management
Central
wavelength
Connector
(nm)
1310
LC
1310
LC
1310
LC
Table
15. Ports 29 to 36 on the front panel of the
Table
Table 17.
Table
18.
47
and
Table
15.
Fiber type and
diameter (µm)
Multi-mode, 50/125
Multi-mode, 62.5/125
Single-mode, 9/125
Single-mode, 9/125
16.
Max
transmission
distance
2 km (1.24 miles)
15 km (9.32 miles)
40 km (24.86 miles)
Advertisement
Table of Contents
