Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence
caused thereby.
Figure 1 Hardware installation flow
Start
Install the switch
Ground the switch
Install fan trays
Install power modules
Connect power cords
Verify the installation
Turn on the circuit
breakers
Operating correctly?
End
Installing the switch in a 19-inch rack
Installation accessories
Table 3 Installation accessories
Switch model
S6861-54QF
S6861-30QF
Troubleshoot the switch
No
Yes
Mounting brackets
1U high, one pair
(provided). See
Figure
Turn off the circuit
breakers
Rack mounting rail kit
•
1U high, including one pair of chassis rails and one
pair of long slide rails (provided). See
2.
•
1U high, including one pair of chassis rails and one
pair of super-short slide rails (optional). See
4
Figure
5.
Figure
3.