Table of Contents
Advertisement
Figure 55 Rear panel
(1) System status LED (SYS)
(3) LINK/ACT LED for the fiber management
Ethernet port
(5) Fan tray 2
(7) Fan tray 4
(9) Power module 2
(11) Copper management Ethernet port
(13) Mini USB console port
An S6861-30QF switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. In
module slots. For more information about installing and removing a power module, see
and removing a power
An S6861-30QF switch comes with the four fan tray slots empty. You must install four fan trays of the
same model for the switch. In
slots. For more information about installing and removing a fan tray, see
fan
tray."
Figure 56 Left side panel
(1) Primary grounding point
Technical specifications
Table 7 Technical specifications
Item
Dimensions
(H × W × D)
Weight
Figure
49, two PSR450-12A power modules are installed in the power
module."
Figure
49, four LSPM1FANSA fan trays are installed in the fan tray
S6861-54QF
44 × 440 × 400 mm (1.73 ×
17.32 × 15.75 in)
≤ 10 kg (22.05 lb)
(2) LINK/ACT LED for the copper management
Ethernet port
(4) Fan tray 1
(6) Fan tray 3
(8) Power module 1
(10) Fiber management Ethernet port
(12) Console port
(14) USB port
(2) Auxiliary grounding point
S6861-30QF
44 × 440 × 400 mm (1.73 ×
17.32 × 15.75 in)
≤ 10 kg (22.05 lb)
40
"Installing
"Installing and removing a
S6861-54QT
44 × 440 × 460 mm (1.73 ×
17.32 × 18.11 in)
≤ 10 kg (22.05 lb)
Advertisement
Table of Contents
