Table of Contents
Advertisement
An S6861-54QT switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. In
module slots. For more information about installing and removing a power module, see
and removing a power
An S6861-54QT switch comes with the five fan tray slots empty. You must install five fan trays of the
same model for the switch. In
slots. For more information about installing and removing a fan tray, see
fan
tray."
Figure 53 Left side panel
(1) Primary grounding point
S6861-30QF
Figure 54 Front panel
(1) SFP+ port LED
(3) QSFP+ port LED
Figure
52, two PSR450-12A1 power modules are installed in the power
module."
Figure
52, five LSPM1FANSB fan trays are installed in the fan tray
39
(2) Auxiliary grounding point
(2) SFP+ port
(4) QSFP+ port
"Installing
"Installing and removing a
Advertisement
Table of Contents
