Engine Oil Life Reset - Dodge CHARGER 2020 Owner's Manual

Left And Right Arrow Buttons:
Using the left or right arrow button allows
you to cycle through the submenu items of the
Main menu item.
NOTE:
Holding the up or down

right arrow button will continuously loop
through the currently selected menu or
options presented on the screen.
Upon returning to a main menu, the last

submenu screen viewed within that main
menu will be displayed.
OK Button:
For Digital Speedometer:
Pushing the OK button changes units (mph or

km/h).
For Screen Setup:
OK button allows user to enter menu and

submenus.
Within each submenu layer, the up

down arrows will allow the user to select
the item of interest.
Pushing the OK button makes the selection

and a confirmation screen will appear
(returning the user to the first page of the
submenu).
Pushing the left

submenu layer and return to the main menu.

Engine Oil Life Reset

Oil Change Required
Your vehicle is equipped with an engine oil
or left or
change indicator system. The "Oil Change
Required" message will display in the
instrument cluster display for five seconds after
a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil
change indicator system is duty cycle based,
which means the engine oil change interval may
fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message
temporarily, push and release the OK or arrow
buttons. To reset the oil change indicator
system (after performing the scheduled
maintenance), refer to the following procedure.
and
Vehicles Equipped With Keyless Enter-N-Go —
Ignition
Use the steering wheel instrument cluster
display controls for the following procedure(s):
GETTING TO KNOW YOUR INSTRUMENT PANEL
arrow button will exit each 1. Without pressing the brake pedal, push the
2. Push and release the down
3. Push and release the right
4. Push and hold the OK button to reset oil life.
5. Push and release the up
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not
start the engine).
arrow button
to scroll downward through the main menu
to "Vehicle Info."
arrow button
to access the "Oil Life" screen.
If conditions are met, the gauge and
numeric display will update to show 100%.
If conditions are not met a pop-up message
of "To reset oil life engine must be off with
ignition in run" will be displayed (for five
seconds), and the user will remain at the Oil
Life screen.
or down
arrow button to exit the submenu screen.
87
3