Safety Information; Electromagnetic Compatibility Guidelines; Hardware Block Diagram - National Instruments roboRIO User Manual

Mounting the NI roboRIO.......................................................................................................24
Method One: Using Cable Ties to Secure One Edge of the NI roboRIO to
Perfboard...................................................................................................................24
Method Two: Using Cable Ties to Secure One Corner of the NI roboRIO to
Perfboard...................................................................................................................26
Method Three: Using Screws to Secure the Bottom of the NI roboRIO to a Metal
Plate.......................................................................................................................... 29
Compatible USB and Ethernet Cables.................................................................................... 29
Warranty.................................................................................................................................. 30
Worldwide Support and Services............................................................................................ 30

Safety Information

Caution
Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to NI for repair.
Clean the product with a soft, nonmetallic brush. Make sure that the product is completely dry
and free from contaminants before returning it to service.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.

Hardware Block Diagram

The following figure shows the arrangement and functions of NI roboRIO components.
Do not operate the roboRIO in a manner not specified in this document.
NI roboRIO User Manual | © National Instruments | 3