Chapter 1 - Introduction; Overview Of The Manual; Other Manuals - ABB ACA 6 Series Hardware Manual

Overview of the
Manual

Other Manuals

ACS 600 MultiDrive Hardware Manual
Study this manual carefully before installing, commissioning, operating
or servicing the frequency converter. We expect that you have a basic
knowledge of physical and electrical fundamentals, electrical wiring
practices, electrical components and electrical schematic symbols.
ACS 600 MultiDrive frequency converters consist of a Supply Section
and one or several Drive Sections. This manual covers:
• System and hardware descriptions of the Drive Section.
• Mechanical and electrical installation of the Supply Section and the
Drive Section. Details are given such as: moving of the shipping
sections, joining of the shipping sections together, joining of the
busbars and fastening of the cabinets to the floor.
• Commissioning of the Drive Section.
Note: For Supply Section commissioning, parameters, fault tracing
and product information see Supply Sections User's Manual (DSU,
TSU or IGBT).
• Preventative maintenance.
Note: Fault and warning messages given by the software are
described in ACS 600 Firmware Manual (for System, Standard or
Crane Drive Application Program) or in Supply Sections User's
Manual (DSU, TSU or IGBT).
The guide Safety and Product Information (English code: 63982229)
includes for ACS 600 MultiDrive:
• The Complete Safety Instructions (see also the user's manual for
the supply section).
• The Technical Data (see also the user's manual for the supply
section). Information concerning ratings, fuses, cooling
requirements, power losses, dimensions etc. is given.
The use of the Control Panel and parameter setting of the inverter
application program is described in ACS 600 Firmware Manual (for
System, Standard or Crane Drive Application Program).
For optional equipment, refer to the accompanying manuals.
For additional information about the drive system, refer to Grounding
and cabling of the drive system (EN code: 61201998).
Chapter 1 – Introduction
1-1