Cornelius NITROPRO MINI Installation And Operator's Manual page 30

Nitropro Mini Installation Manual
Step
A. Remove bucket of water and obtain a product BIB.
B. Place it in the cabinet, outlet port towards the base of
the cabinet, and connect the BLACK product output
connector by turning the threaded connector ring
28
clockwise. Be sure the connector is screwed on com-
pletely.
C. Close the cabinet door.
A. Open LEFT Tap Handle to pour 16Oz (until coffee
comes out).
B. Close the Tap.
C. Open RIGHT Tap Handle to pour 8Oz (until coffee
comes out).
D. Close the tap.
29
NOTE: Do not open both valves at the same
Change the Dispense motor switch position to 'on' from
30
clean mode.
The sanitizing procedure is complete.
31
Publication Number: 548000106INS
Action
time as dispensing may pulse or
even stop.
- 26 -
Figure 38
Figure 39
Figure 40
Figure 41
© 2018, Cornelius Inc.