Cornelius NITROPRO MINI Installation And Operator's Manual page 29

Hide thumbs Also See for NITROPRO MINI:
Table of Contents

Advertisement

Step
Replace both mixing chambers, Left, and Right nozzles.
25
NOTE: Check that o-rings are on the mix-
Final Rinse
A. Using a clean and empty food-grade container:
Prepare approximately 0.5 gallons (1.9 liters) of
warm water. Place the container of water inside the
cabinet.
B. Place the BLACK product output connector with
the WHITE cleaning adapter inside the food-grade
container so that the connector will stay at the
bottom.
26
C. Open LEFT Tap Handle and dispense 0.25 gallons
(0.95 liters) of warm water.
D. Close the tap.
E. Open RIGHT Tap Handle and dispense 0.25 gallons
(0.95 liters) of warm water.
F.
Close the tap.
NOTE: Do not open both valves at the same
Disconnect the WHITE cleaning adapter from the
BLACK product output connector by turning the
27
BLACK connector counterclockwise and lifting on the
outside of the BLACK connector.
© 2018, Cornelius Inc.
Action
ing chamber and dispense nozzles.
time as dispensing may pulse or
even stop.
- 25 -
Nitropro Mini Installation Manual
Figure 35
Figure 36
Figure 37
Publication Number: 548000106INS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nitropro mini

Table of Contents