Mitsubishi MELDAS HS Series Specifications And Instruction Manual page 6

Store and use the units under the following environment conditions.
Environment
Ambient
temperature
Ambient humidity
Storage temperature
Storage humidity
Atmosphere
Altitude
Vibration
Securely fix the servomotor to the machine. Insufficient fixing could lead to the
servomotor deviating during operation.
Never touch the rotary sections of the servomotor during operations. Install a cover, etc.,
on the shaft.
When coupling to a servomotor shaft end, do not apply an impact by hammering, etc.
The detector could be damaged.
Do not apply a load exceeding the tolerable load onto the servomotor shaft. The shaft
could break.
When storing for a long time, please contact your dealer.
CAUTION
Servomotor
0°C to +40°C
(with no freezing)
80% RH or less
(with no dew condensation)
–15°C to +65°C
(with no freezing)
90% RH or less (with no dew condensation)
Indoors (Where unit is not subject to direct sunlight)
With no corrosive gas, combustible gas, oil mist or dust.
1000m or less above sea level
X: 9.8m/sec
HS-RF
HS-SF
Y: Y: 24.5m/sec
(1kW or less)
(2.5G) or less
X: 19.6m/sec
HS-SF
(2.0kW or
Y: 49m/sec
less)
less
X: 19.6m/sec
HS-MF
Y: 19.6m/sec
or less
Conditions
(with no dew condensation)
2
(1G)
2
2
(2G)
2
5.9m/sec
(5G) or
2
(2G)
2
(2G)
IV
Interface unit
0°C to +55°C
(with no freezing)
90%RH or less
–20°C to +65°C
(with no freezing)
2
(0.6G) or less