Mitsubishi MELDAS HS Series Specifications And Instruction Manual page 5

3. Injury prevention
Do not apply a voltage other than that specified in Instruction Manual on each terminal.
Failure to observe this item could lead to ruptures or damage, etc.
Do not mistake the terminal connections. Failure to observe this item could lead to ruptures
or damage, etc.
Do not mistake the polarity(
damage, etc.
Do not touch the servo amplifier fins, regenerative resistor or servomotor, etc., while the
power is turned ON or immediately after turning the power OFF. Some parts are heated to
high temperatures, and touching these could lead to burns.
4. Various precuations
Observe the following precautions. Incorrect handling of the unit could lead to faults, injuries and
electric shocks, etc.
(1) Transportation and installation
Correctly transport the product according to its weight.
Do not stack the products above the tolerable number.
Do not hold the cables, axis or detector when transporting the servomotor.
Follow this Instruction Manual and install the unit in a place where the weight can be borne.
Do not get on top of or place heavy objects on the unit.
Always observe the installation directions.
Do not install or run a servo amplifier or servomotor that is damaged or missing parts.
Do not let conductive objects such as screws or metal chips, etc., or combustible materials
such as oil enter the servo amplifier or servomotor.
The servo amplifier and servomotor are precision devices, so do not drop them or apply
strong impacts to them.
CAUTION
, ) . Failure to observe this item could lead to ruptures or
+ –
CAUTION
III