Installing Drivers And Software; Installing An Operating System; Installing System Drivers - Zotac ZBOX P Series User Manual

Installing drivers and software

Installing an operating system

The ZOTAC ZBOX pico does not ship with an operating system preinstalled. The user
must install the operating system before the ZOTAC ZBOX pico can be used. The following
operating systems are supported:
• Windows 10 64-bit
Follow the instructions below to install an operating system:
1. Attach external USB drive via USB 3.0 ports.
2. Insert disk for operating system (Windows or Linux).
3. Wait for the ZOTAC ZBOX pico to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX pico hardware and
features.

Installing system drivers

Before you can use the full features of the ZOTAC ZBOX pico, the system drivers must be
installed. The following types of operating systems are supported by the USB flash drive:
• Windows 10 64-bit
Follow the instructions below to install the
system drivers:
1. Insert the USB flash drive. If autorun is
enabled, the driver installation main menu
will show up automatically. If autorun is
disabled, you may click the file
Launch.EXE to bring up the driver
installation main menu.
2. The following drivers are available on the
USB flash drive:
• Intel Chipset Driver
• HDA Sound Driver
• Intel Graphics Driver
ZOTAC ZBOX pico 10