Page 2
ZOTAC ZBOX ZOTAC ZBOX User’s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means,except documenta- tion kept by the purchaser for backup purposes, without the express written permission of ZOTAC.
Installing a hard disk -------------------------------------------------------------------------- 15 Setting up your ZOTAC ZBOX ---------------------------------------------------------------- 17 Positioning your ZOTAC ZBOX --------------------------------------------------------------- 19 Installing the stand ----------------------------------------------------------------------------- 19 Installing your ZOTAC ZBOX to a monitor ----------------------------------------------- 19 IR receiver --------------------------------------------------------------------------------------- 20 Remote control --------------------------------------------------------------------------------- 20 Function keys ------------------------------------------------------------------------------- 20...
ZOTAC ZBOX Product Specifications q Chipset v Intel ® NM70 Express q Product Size v 188mm x 188mm x 51mm q Microprocessor support v Intel ® Core Processor (1.1 GHz, dual-core) q Operating systems: v Supports Windows 7 32bit/64bit and Windows 8 32bit/64bit...
ZOTAC ZBOX Safety information Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor- mation technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before you operate your system.
ZOTAC ZBOX Welcome Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays the package contents of your new ZOTAC ZBOX. If any of the below items is damaged or missed, contact your retailer. Package contents • 1 x ZOTAC ZBOX •...
ZOTAC ZBOX Getting to know your ZOTAC ZBOX Front view Refer to the diagram below to identify the components on this side of the system 1. Headphone/Audio Out jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones.
ZOTAC ZBOX Rear view Refer to the diagram below to identify the components on this side of the system. 1. WiFi antenna connector The WiFi antenna connector supports WiFi antenna module. 2. Optical (SPDIF OUT) jack Plug an optical cable into this jack for digital audio transfer.
ZOTAC ZBOX BIOS settings of specific functions ZOTAC ZBOX has some specific functions which can be enabled or disabled in BIOS settings, such as LED indicator, USB2.0 charge and CIR controller. How to disable the ring LED indicator Turn on the ZBOX mini-PC, then press <Delete> to enter the BIOS SETUP UTILITY.
ZOTAC ZBOX Press <Enter> and select Disabled. Press F10 to save the configuration and exit. How to enable USB2.0 charge (for S3/S4/S5 status) In PowerManage menu, select USB2.0 S3/S4/S5 Charge Function and press <Enter>.
Page 11
ZOTAC ZBOX Use the arrow keys to enter the item Rear / Front / Top USB2.0 S3/S4/S5 Charge, and select Enabled. Press F10 to save the configuration and exit. Note: Before charging via USB2.0 in S5 status, please make sure the Deep S5...
ZOTAC ZBOX How to disable CIR controller (for internal IR receiver) Use the arrow keys to navigate to Advanced > OnBoard Device Control > CIR Controller Configuration. Enter CIR Controller and select Disabled. Enabled: enable the internal IR receiver (default) Disabled: disable the internal IR receiver Press F10 to save the configuration and exit.
ZOTAC ZBOX Installing Hardware inside ZOTAC ZBOX Before installing hardware, please follow the instructions below to remove the cover of your ZOTAC ZBOX. 1. Unscrew. 2. Gently remove the cover as the image below.
2. Gently press down on the memory module until it locks into place by the arms of the memory slot. Note: This ZOTAC ZBOX accomodates two DDR3 SO-DIMM memory modules. You must install at least one module in one of the two slots.
ZOTAC ZBOX Removing the memory module 1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory module outwards, as shown in the image below, to release the memory module. 2. Remove the memory module from the slot at a 45-degree angle.
ZOTAC ZBOX Setting up your ZOTAC ZBOX You need to connect peripherals before using your ZOTAC ZBOX. 1. Connecting a WiFi antenna module Connect a WiFi antenna module to the WiFi antenna connector. 2. Connecting an optical S/PDIF output Connect a digital audio device via optical S/PDIF output.
Page 19
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system. When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the ...
Installing your ZOTAC ZBOX to a monitor You can also install your ZOTAC ZBOX to the back of a monitor. To do so: Secure the VESA mount to your monitor with four screws (HNM/M4x8). Place your ZOTAC ZBOX on the VESA mount noting the correct alignment and then secure the PC to the VESA mount with a coin.
Enjoy more of your favorite entertainment by MCE (Media Center Edition) remote controller with USB IR receiver (connecting to USB 2.0 port). External USB IR receiver Remote control ZOTAC ZBOX is shipped with a remote control. Follow the instructions below to use the remote control. Function keys Navigation Buttons Playback Buttons ...
ZOTAC ZBOX Lithium cell installation 1. Locate the arrow on the rear cover of the remote control, and push the cover as the arrow direction. 2. Remove the rear cover, and insert the CR2032 lithium cells into the battery jar at a 45 degree angle.
Note: For best compatibility, please only use the USB 2.0 ports as the OS installation source drive connection. Installing system drivers Before you can use the full features of the ZOTAC ZBOX, the system drivers must be installed. The following types of operating systems are supported by the ZOTAC ZBOX driver DVD: •...
Select the driver you want to install. The driver installer should launch. Follow the onscreen instructions to install the drivers. Restart the system. Using your ZOTAC ZBOX Configuring wireless connection To connect to a wireless network, follow the instructions below: Double-click the crossed wireless network icon (pic) on the notification area.
Configuring audio output via an HDMI device Follow the steps below to enable audio output via HDMI when connecting the ZOTAC ZBOX to a TV or receiver via HDMI. Access the Sound settings via the system Control Panel.