Using Your Zotac Zbox Pico; Configuring A Wireless Connection - Zotac ZBOX P Series User Manual

• Realtek Ethernet PCI-E Driver
• Intel TXE Driver
• Wireless Network Driver
• Bluetooth Driver
• SerialIO Driver
• DPTF Driver
• USB Charger (optional)
Note: If you want to use high-amperage USB charging for smartphones and tablets,
please install the driver USB Charger driver.
 Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX
pico.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.

Using your ZOTAC ZBOX pico

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification
area.
2. Select the wireless network you want to connect to from the
list and click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
11
ZOTAC ZBOX pico