Data Backup Of Sinamics S120; Basics Of Data Management At Sinamics S120; Data Access Via The S7T Config Configuration Tool - Siemens SINAMICS S120 Faq

SINAMICS S120 at Technology CPU Entry ID: 21767896
4

Data Backup of SINAMICS S120

You are provided with information on...
how to back up data at SINAMICS S120 before recommissioning.
4.1

Basics of data management at SINAMICS S120

The complete data management of SINAMICS S120 with parameter data
and BICO interconnection is stored on the compact flash card plugged in
the CU320 control unit.
During startup of the CU320 control unit, the data are loaded from the
compact flash card to the RAM of the control unit.
Figure 4-1 SINAMICS S120 – compact flash card
4.2

Data access via the S7T Config configuration tool

If an online connection to SINAMICS S120 is currently established via the
S7T Config configuration tool or if parameter data or BICO interconnections
are loaded to the drive via the S7T Config configuration tool, these data are
stored in the RAM of the drive.
The data of SINAMICS S120 displayed online in the S7T Config
configuration tool are also located in the RAM of the CU320 control unit.
Figure 4-2 Data transfer between S7T Config and SINAMICS S120
S7T-Config
V1.0
Data Backup of SINAMICS S120
Download to target device...
Load to PG...
Edition 10/28/05
Requirements
SINAMICS S120
Copy RAM to ROM
RAM
Reboot
23/58