Siemens SINAMICS S120 Faq page 12

SINAMICS S120 at Technology CPU Entry ID: 21767896
Figure 3-2 DIP switches for setting the Profibus address
The Profibus address can be set according to the following diagrammatic
representation:
Figure 3-3 Setting the Profibus address (address 3)
As default setting of the Profibus address, address 126 is set in the
Note
parameter p0918 of SINAMICS S120. To avoid access problems caused
by an unknown Profibus address during commissioning, the address
should be preset via DIP switches prior to commissioning (e.g.: address
3).
V1.0
Connection Establishment to SINAMICS S120
Edition 10/28/05
Requirements
12/58