Turning On The Media Station - Avaya E169 Manual

Turning on the media station

Before you begin
• Assemble the media station and connect to the network. Connect to AC power if required.
• Download and install the Avaya E169 IP Media Station app.
• Verify administration of the SIP line with your system administrator.
• Connect your device to the media station.
Procedure
1. Turn on power to the media station.
The following occurs when you apply power:
• The Mute, Call/Volume, and Voice Mail LEDs on the media station light up in that order,
then go dark after a few seconds.
• You might get a "Trust this computer" query from your smart device. Accept the query.
• If you installed the app on a smart device and you connected the smart device to the
media station with a USB cable, the app opens on the smart device.
• You might hear a beep and a pairing message from the media station.
• For an iOS device, the media station automatically attempts to pair using Bluetooth.
• For an Android device, you must initiate manual Bluetooth pairing.
• If not set on the handset cradle, the handset displays the message Connecting, followed
by alternating displays of the current time and the SIP line telephone number.
2. If the media station app displays the message Not Connected (Network), a network
connection is not present. Troubleshoot the reason for no network connectivity. An Offline
(Disconnected) message indicates that the account is not administered.
June 2014 Installing and Maintaining the Avaya E169 IP Media Station
Comments? infodev@avaya.com
Software installation
41