Table of Contents
Advertisement
EnglisH
0
Problem
The SENSEO
machine
®
is quite loud when I
brew a coffee variety
with milk or flush the
milk container unit.
The SENSEO
machine
®
does not produce good
or enough milk froth.
Can the milk container
lid be opened for
cleaning?
What is the Clean/Calc-
Clean button for?
The light ring round the
2-cup button is off and
I cannot operate this
button.
The Clean indicator
flashes slowly.
The Calc-Clean
indicator is on
continuously.
I pressed the Clean/
Calc-Clean button but
the machine doesn't
work.
Solution
Steam pressure is required for a perfect cup of coffee with frothed milk. It is
therefore normal that you hear a hissing sound. The machine is louder during
flushing because more steam pressure is necessary to flush the milk container
unit than is required to froth the milk.
1.The milk container unit may be dirty. Clean the milk container unit by
following the instructions in chapter 'Cleaning', section 'Cleaning after the last
use of the day'.
2.You may have used milk that is not cold enough. Make sure you use cold
milk straight from the refrigerator (5-8 degrees).
3. You may have used rice or soy milk. This kind of milk does not produce a
good quality milk froth. Use other milk for a perfect cup of coffee with milk
froth.
To clean the milk container lid, press the milk container lid release lever
and remove the milk container lid from the milk container. Open the milk
container lid cover by pulling and slightly turning the knob and remove the
milk tube. For more thorough cleaning you can also remove the steam inlet.
For cleaning instructions, see chapter 'Cleaning', section 'Cleaning after the last
use of the day'.
You use this button to flush the milk container unit with fresh cold water
immediately after use. You also use this button to descale the machine when
the Calc-Clean indicator comes on.
1. You wanted to brew two cups of black coffee and the light ring round the
2-cup button is off because there is not enough water in the water reservoir
for 2 cups of black coffee. Fill the water reservoir.
2. If you selected a coffee variety with milk, you can only brew 1 cup at the
time. That's why the light ring round the 2-cup button is off and only the light
ring round the 1-cup button is on.
When you have brewed a coffee variety with milk, the Clean indicator starts
to flash to remind you to flush the milk container unit (see chapter 'Cleaning').
The Calc-Clean indicator goes on when you need to descale the machine.
This happens after 1000 cups of SENSEO
cappuccino, latte macchiato or caffè latte have been brewed. To descale your
SENSEO
machine, follow the instructions in chapter 'Descaling'. When the
®
Calc-Clean indicator flashes rapidly, the descaling program is finished.
1. If you want to flush the milk container unit, make sure the milk container is
placed and filled with cold water.
2. If you want to descale the machine, make sure the Calc-Clean tool is
placed correctly. See chapter 'Descaling' in the user manual for more details.
3. Perhaps you switched the machine off. The machine needs some time to
heat up before cleaning is possible.
black coffee or 500 cups of
®
Advertisement
Table of Contents
