Table of Contents
Advertisement
Using the machine
Preparing for use
1
Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
-
q MIN: minimum amount of water required to brew 1 cup of
SENSEO
black coffee, cappuccino, latte macchiato or caffè latte.
®
-
qq MIN: minimum amount of water required to brew 2 cups of
SENSEO
black coffee.
®
-
A full reservoir allows you to make 6 large cups h, 8 medium cups
g or 10 small cups f of SENSEO
unnecessary to fill the water reservoir each time you want to make a
cup of coffee.
Press the on/off button 3.
The indicator light flashes slowly while the water is heating up.
,
Heating up takes approx. 90 seconds.
The coffee machine is ready for use when the indicator light is on
,
continuously and the light rings around the 1-cup button and/or the
2-cup button go on.
If the indicator light flashes rapidly, the water reservoir does not
,
contain enough water for brewing one cup of coffee.
Move the lid lever upwards to release the lid.
Open the lid.
5
Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
-
Use 1 coffee pod in combination with the 1-cup pod holder and the 1-
cup button q if you want to make one cup of SENSEO
cappuccino, latte macchiato or caffè latte.
-
Use 2 coffee pods in combination with the deeper 2-cup pod holder
and the 2-cup button qq if you want to make two cups of SENSEO
black coffee.
6
Place the SENSEO
holder, with the convex side pointing downwards.
Note: Use SENSEO
coffee pods from Douwe Egberts specially designed for
®
your SENSEO
coffee machine for a full and round taste.
®
black coffee. This makes it
®
coffee pod(s) properly in the centre of the pod
®
EnglisH
11
black coffee,
®
®
Advertisement
Table of Contents
