Philips Senseo “Latte Select” HD7850/60 Service Manual

Philips Senseo “Latte Select” HD7850/60 Service Manual

Hide thumbs Also See for Senseo “Latte Select” HD7850/60:

Advertisement

Quick Links

Philips Consumer Lifestyle
Service Manual

PRODUCT INFORMATION

- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.

TECHNICAL INFORMATION

- Voltage
- Frequency
- Power consumption
Boiler
Steam heater
- Standby power (switched off ) : < 1 W
- Standby power
(switched on 30 min)
- Pressure Coffee system
- Pressure Steam system
- Contents water reservoir
- Contents milk reservoir
- Auto shut off
- Variable Coffee volume
Published by Philips Consumer Lifestyle
08/09
Coffee Maker Senseo "Latte Select"
: 220 - 240 V
: 50 - 60 Hz
: 2650 W
: 1450 W
: 1200 W
: ± 30 W
(room temperature)
: < 1.6Bar
: < 1 Bar
: 1200 cc/mL
: 120 cc/mL
: 30 min
: Min, Normal and Max
Printed in the Netherlands
Coffee volume overview
Min cc/mL
France version
80
General version
80
Coffee/Milk receipe volume
all versions cc/mL
160 ± 16
Cappuccino
220 ± 24
Latte Macchiato
190 ± 20
Café Latte
- Colour setting
- Sap coding
© Copyright reserved
HD7850/60
Normal cc/mL
Max cc/mL
100
140
122
145
Indication temperature for
chosen Coffee/Milk receipe,
very depended from milk inlet
temperature. (°C)
≥ 69
≥ 63
≥ 67
: Deep Black
: HD7850/60
Subject to modification

Advertisement

Table of Contents
loading

Summary of Contents for Philips Senseo “Latte Select” HD7850/60

  • Page 1 : 1200 cc/mL - Contents milk reservoir : 120 cc/mL - Auto shut off : 30 min - Variable Coffee volume : Min, Normal and Max Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification 08/09...
  • Page 2 HD7850/60 Build up: Steam circuit Steam seal Venting Brew Three-way valve Reflux Chamber valve with valve in Water Check valve milk Container container Pressure Boiler release valve Check valve Thermo block Steam Overpressure pump Water pump Inside the appliance valve Legend: Low pressure tube High pressure tube...
  • Page 3 DISASSEMBLY- AND RE-ASSEMBLY ADVISE HD7850/60 Remove back cover. Remove brew chamber cover to reach user interface PCB. - Remove screws (T15) from the back cover. - To remove the brew chamber lid cover place the screwdriver on the positions (see picture) and lift the cover over the - Remove valve outlet.
  • Page 4 REPAIR INSTRUCTION HD7850/60 Descaling Volume adjustment Regular descaling will prolong the life of your appliance and The PCB circuit board makes it possible to adjust the volume will guarantee optimal brewing results for a long time. output by means of pushing the one-cup and two-cup user controls.
  • Page 5 REPAIR INSTRUCTION HD7850/60 Service test routines. Automatic fi lling procedure: The Senseo PCB contains an automatic fi lling procedure software routine. Sensors and buttons check mode. This fi ll routine is only meant for back-up. The Senseo is equipped with a lot of sensor and push buttons. Normally the consumer has to follow the guidelines stated in the DFU.
  • Page 6 PARTS LIST HD7850/60 Service code Description 4222 259 41540 Padholder assy 1-cup Dark Grey 4222 259 41550 Padholder assy 2-cup Dark Grey 4222 259 41730 Milk container assy Translucent Bright White 4222 240 00320 Driptray cover 4222 259 42320 Driptray assy Deep Black 4222 259 41510 Water container assy...
  • Page 7 EXPLODED VIEW HD7850/60 7-11...
  • Page 8 EXPLODED VIEW HD7850/60 8-11...
  • Page 9 EXPLODED VIEW HD7850/60 9-11...
  • Page 10 EXPLODED VIEW HD7850/60 10-11...
  • Page 11 EXPLODED VIEW HD7850/60 11-11...

Table of Contents