Table of Contents
Advertisement
EnglisH
10
Close the lid and lock the lid lever.
Note: Make sure the lid lever is properly locked by pushing it down until it
snaps home with a click. It is not possible to flush the machine when the lid is
not properly closed.
Put the plug in an earthed wall socket.
Put a bowl (with a capacity of at least 1.5 litres) under the
coffee spout to collect the water.
10
Press the on/off button 3.
After you press the on/off button 3, the light rings around the 1-cup
button q and the 2-cup button qq light up continuously.
11
Press the 1-cup button q and the 2-cup button qq briefly at the
same time.
The boiler fills itself with water from the water reservoir. This may
,
take some time (approx. 90 to 150 seconds). The machine switches
off automatically when the flushing cycle ends. During the flushing
cycle, the machine produces more noise than during a regular
brewing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
Note: If the machine does not work properly, repeat steps 1 to 11. Do not
interrupt the flushing cycle.
1
Clean the coffee spout, the coffee collector, the pod holders, the
milk container and the milk container lid with hot water and some
washing-up liquid or in the dishwasher. Clean the water reservoir
thoroughly in hot water, if necessary with some washing-up liquid.
Now your Philips SENSEO
coffee machine is ready for use.
®
Advertisement
Table of Contents
