Table of Contents
Advertisement
Problem
The coffee is too weak.
The coffee is too strong
The fuse cuts off the
power supply when I
switch on the SENSEO
machine or during use.
When I brew black
SENSEO
coffee, the
®
coffee is cold/not hot
enough.
Solution
3. Perhaps you are using the wrong pods. We advise you to use Douwe
Egberts SENSEO
®
developed in cooperation with Douwe Egberts. Use of Douwe Egberts
SENSEO
pods in the SENSEO
®
1. You may not have placed the coffee pod in the pod holder correctly.
Put the pod in the centre of the pod holder with its convex side pointing
downwards.
2. You may have accidentally used the same coffee pod twice. Use a new pod
for every cup you brew.
3. You may have used the wrong pod holder or the wrong number of pods.
Use 1 pod in combination with the 1-cup pod holder and the 1-cup button.
Use 2 pods in combination with the 2-cup pod holder and the 2-cup button.
4. You have selected a large amount of coffee (only with 'black' coffee). Press
the volume select button to choose a smaller amount of black coffee to give
your coffee a stronger flavour.
5. You have chosen a pod with a milder flavour. We advise you to experiment
with other pods, e.g Dark Roast for a stronger flavour.
6. If you prefer your coffee strong, you can also try using 2 pods in the 2-cup
holder and pressing the 1-cup button.
1. You may have accidentally pressed the 1-cup button while you intended to
brew two cups of coffee. Check if the coffee tastes good when you press the
2-cup button when you want to brew two cups of coffee at the same time.
2. You may have chosen a smaller amount of coffee (only with "black" coffee).
Press the volume select button to choose a larger amount of black coffee to
give your coffee a weaker flavour.
3. If you used Dark Roast or Regular coffee pods, these varieties are too
strong.We advise you to buy Mild Roast. This coffee has a milder flavour.
4. If Mild Roast or Decaffeinated coffee is too strong, press the volume select
button to choose a larger amount of black coffee to get weaker coffee.
5. You may have used the wrong pod holder or the wrong number of pods.
Use 1 pod in combination with the 1-cup pod holder and the 1-cup button.
Use 2 pods in combination with the 2-cup pod holder and the 2-cup button.
Unplug other appliances connected to the same circuit. Then plug in the
SENSEO
machine again to check if the fuse cuts off the power supply again.
®
If it does, take the SENSEO
®
centre. The SENSEO
2650W.
1. The machine is may be clogged with lime scale. Descale the machine
by following the instructions in chapter 'Descaling' in the user manual. Use
a descaler based on citric acid. Do not use white vinegar to descale the
machine.
coffee pods. The SENSEO
machine guarantees the best results.
®
machine to your dealer or to a Philips service
®
Caffè Latte has a maximum power consumption of
®
EnglisH
coffee machine has been
®
5
Advertisement
Table of Contents
