Rinse/Self-Cleaning Cycle; For A Perfect Espresso: Rinse The Coff Ee Circuit If Using The Machine For The Fi Rst Time Or After A Long Period Of Inactivity - Philips Saeco HD8753/89 Operating Instructions Manual

ENGLISH
10

Rinse/Self-Cleaning Cycle

After the automatic priming of the circuit, the machine will automatically
rinse/clean the circuit. This cycle allows you to rinse the internal coff ee
circuits with fresh water. The cycle is automatically performed also in the
following conditions:
• At machine start-up (with cold boiler)
• After priming the circuit (with cold boiler)
• During the Stand-by preparation phase (if a coff ee product has been
brewed)
• During the turning off phase after pressing the ON/OFF button (if a
coff ee product has been brewed).
A small amount of water will be dispensed to rinse and heat all the ma-
chine parts; in this phase this icon is displayed.
We strongly recommend to wait for the cycle to fi nish automatically.
You can stop dispensing by pressing the "
For a perfect Espresso: Rinse the coff ee circuit if using the machine
for the fi rst time or after a long period of inactivity.
Besides the rinse/self-cleaning cycle, we recommend you to run these
simple operations to always brew excellent espresso.
They have to be performed:
A) At fi rst start-up;
B) When the machine remains inactive for a long time (more than 2
weeks).
1
Place a large container under the dispensing spout.
Before starting the procedure, check that the following icon is dis-
played.
2
Select the pre-ground coff ee brewing function by pressing the "
button one or more times, until the following icon is displayed.
Note: Do not add pre-ground coff ee into the compartment.
" button.
"