Descaling - Philips Saeco HD8753/89 Operating Instructions Manual

One touch cappuccino
Hide thumbs Also See for HD8753/89:
Table of Contents

Advertisement

ENGLISH
42
3
Insert the Brew Group in its seat again until it locks into place WITHOUT
pressing the "PUSH" button.
Note: the detailed instructions to prepare the brew group and insert it correctly
in the machine can be found on page 38 (points 7, 8, 9 and 10) of the section
"Brew Group - Weekly Cleaning".
4
Insert the coff ee grounds drawer. Close the service door.

Descaling

Limescale is a natural part of the water used for the machine operation. It
needs to be removed regularly as it may clog the water and coff ee circuit of
your appliance.
This is an easy procedure with your Philips-Saeco machine.
The advanced electronics tells you on the display of the machine (in clear
symbols) when descaling is needed. Just follow the steps described below.
Not doing this will ultimately make your appliance stop working properly,
and in this case repair is not covered under your warranty.
Note: Empty the drip tray before performing the descaling cycle.
Use the Saeco descaling product only. Its formula has been designed to
ensure better machine performance and operation for its whole operating
life. If correctly used, it also avoids alterations in the brewed product. The
descaling solution and the complete "Maintenance Kit" may be purchased
at your local dealer, at the Philips on-line shop at http://shop.philips.com or
at authorised service centres.
Warning! Never drink the descaling solution or any products dispensed
until the cycle has been carried out to the end. Never use vinegar as a
descaling solution.
1
Turn on the machine by pressing the "
to fi nish its rinse and warm-up process.
Warning! Remove the "Intenza" fi lter before adding the descaling solution.
" button. Wait for the machine

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents