Profibus-Dp Option Components - YASKAWA SI-P3/V Technical Manual

4

PROFIBUS-DP Option Components

PROFIBUS-DP Option
Figure 2
PROFIBUS-DP with cover attached
E
D
C
<1> Cables are not connected to the PROFIBUS-DP Option and are packaged separately in
Note: For details on the LEDs,
Dimensions
The installed PROFIBUS-DP Option adds 27 mm (1.06 in.) to the total depth of the drive.
Figure 3
Communication connector
The drive has a 9 pin D-sub connector for installing the option card. Once installed, the drive can connect to a
PROFIBUS network.
YASKAWA ELECTRIC SIEP C730600 23B V1000 Option PROFIBUS-DP Technical Manual
RUN COMM
ERR BF
A – LED (Comm: green)
B – LED (BF: red)
C – Option cover
D – LED (ERR: red)
E – LED (RUN: green)
F – PROFIBUS-DP PCB
G – Attachment screw hole for
option cover
the box.
Figure 2 Option Unit
Refer to PROFIBUS-DP Option LED Display on page
27 mm (1.06 in.)
Figure 3 Dimensions
4 PROFIBUS-DP Option Components
PROFIBUS-DP with cover removed
Underside
A
B
N
J
M
H – Nameplate
I – Function Earth cable
connection (FE)
J – Mounting clip
K – Cable
L – Through-hole for cable
M – Communication cable
connector (9-pin D-SUB)
N – Option board connector
10.
F
G
H
FE
I
J
K
L
<1>
(Figure 3)
9