Using installation/service mode of ERV wired remote controller
The example of setting ERV wired remote controller options
1. Press the Mode and
than 3 seconds.
f When main menu is displayed, press the
f
2. Press the Away button to select the number you will set on
the sub menu.
f Press the
or
button to select no .1
f
3. Press the Away button to enter the data setting stage.
f When you enter the setting stage, the current setting is displayed .
f
4. Press the
or
f The status of external interlock changes from "Disuse" to "Use" .
f
5. Press the Set button to complete the option settings.
f Save the setting value and exit to sub menu .
f
6. Press the Timer button to exit to normal mode.
ENGLISH-20
buttons at the same time for more
or
button to select no.1
button to select no .5 .