Diagnostic Indicators; Diagnostic Indicators On The Front Panel - Dell DSS 1510 Owner's Manual

Item Indicator, Button,
or Connector
7 System
identification port
8 USB 3.0 port
9 USB 2.0 port
10 Video/VGA port
Related reference
Technical specifications

Diagnostic Indicators

The diagnostic indicators on the system front panel display error status during system startup.

Diagnostic indicators on the front panel

The diagnostic indicators on the system front panel display error status during system startup.
NOTE: No diagnostic indicators are lit when the system is turned off. To turn on the system, plug it into a working
power source and press the power button.
Table 5. Diagnostic indicators
Icon Description
Health indicator
Related reference
Getting help
Description
Icon
Use the system identification port to connect the system status indicator
assembly through the optional cable management arm.
Use the USB 3.0 port to connect USB devices to the system. These ports
are 9-pin, USB 3.0 compliant.
Use the USB 2.0 port to connect USB devices to the system. These ports
are 4-pin, USB 2.0 compliant.
Use the video/VGA port to connect a display to the system. For more
information about the supported video/VGA port, see the Technical
specifications section.
Condition
The indicator turns solid blue if the
system is in good health.
The indicator blinks amber:
• When the system is turned on.
• When the system is in standby.
• If any error condition exists. For
example, a failed fan, power
supply unit (PSU), or a hard drive.
Corrective action
None required.
Check the System Event Log or system messages for
the specific issue. For more information about error
messages, see the Dell Event and Error Messages
Reference Guide at Dell.com/openmanagemanuals >
OpenManage software.
The POST process is interrupted without any video
output due to invalid memory configurations. See the
Getting help section.
Dell DSS 1510 system overview 13