Diagnostic Indicators On The Front Panel - Dell DR4300e Owner's Manual

Item Indicator, button, or
connector
2 System identification
connector
3 iDRAC8 Enterprise port
4 Half-height PCIe
expansion card slot (3)
5 Serial connector
6 Video connector
7 USB port (2)
8 Full-height PCIe
expansion card slot (3)
9 Ethernet connector (4)
10 Power supply unit (PSU1)
11 Power supply unit
(PSU2)

Diagnostic indicators on the front panel

NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.
NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it into
a working power source and press the power button.
Icon Description
To reset iDRAC (if not disabled in F2 iDRAC set up)
press and hold the button for more than 15
seconds.
Connects the optional system status indicator
assembly through the optional cable management
arm.
Dedicated management port.
Enables you to connect up to 3 half-height PCI
Express expansion cards.
Enables you to connect a serial device to the
system.
Enables you to connect a VGA display to the
system.
Enables you to connect USB devices to the system.
The ports are USB 3.0-compliant.
Enables you to connect up to 3 full-height PCI
Express expansion cards.
Four integrated 10/100/1000 Mbps Network
Interface Card (NIC) connectors
or
Four integrated connectors that include:
• Two 10/100/1000 Mbps NIC connectors
• Two 100 Mbps/1 Gbps/10 Gbps SFP+/10 GbE T
connectors
AC
AC
750 W
750 W
11