Table of Contents
Advertisement
Figure 76. Screw location on the system board
a. screw (9)
Next steps
1. Install / connect the following components:
a. the expansion card riser
b. heat sink(s) and processors(s)
c. processor blank(s) and heat sink blank(s), if installed
d. memory modules and memory module blanks
e. cooling fans
f. cooling shroud
g. power supply unit(s)
2. Reconnect all cables to the system board.
NOTE:
Ensure that the cables inside the system are routed along the chassis wall .
3. Follow the procedure listed in the After working inside your system section.
4. Ensure that you:
a. Use the Easy Restore feature to restore the service tag.
b. Update the BIOS and iDRAC versions.
Related tasks
Before working inside your system
Installing the cooling shroud
Installing a cooling fan
Installing the expansion card riser
Installing a cabled power supply unit
120
Installing and removing system components
Advertisement
Table of Contents
Troubleshooting
