Dell DSS 1510 Owner's Manual page 41

Option Description
Option
Level 2 Cache
Level 3 Cache
Number of Cores
Related tasks
Viewing Processor Settings
Related reference
Processor Settings
SATA Settings
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system.
Related tasks
Viewing SATA Settings
Related reference
SATA Settings details
System BIOS
Viewing SATA Settings
To view the SATA Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click SATA Settings.
Related reference
SATA Settings
SATA Settings details
SATA Settings details
About this task
The SATA Settings screen details are explained as follows:
Option Description
Embedded SATA Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI by
default.
Description
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Pre-operating system management applications 41