Changing The Jets - Miele KM 404 Installation Instructions Manual

Changing the jets

Disconnect the gas hob from the
electricity supply. Depending on the
type of installation, either withdraw
the mains fuse, switch off at the
fused spur unit, or at the socket and
withdraw the plug.
Changing the main jet
^ Take off the pan support, the burner
cover b, the burner ring c and the
burner head d.
^ Using an SW7 socket spanner
unscrew the main jet e.
^ Change the main jet.
^ Reassemble the burner head, burner
ring and burner cover in the correct
order.
Conversion to another type of gas
Changing the small jet
^ Guide a screwdriver through the
holes in the the lower casing of the
hob and loosen the low setting jets
f.
^ Pull the jets out with a pair of pointed
pliers
^ Put in the new jets with a pair of
pointed pliers.
^ Secure the new jets with a
screwdriver.
^ Finally secure the jets against
inadvertent loosening with sealing
wax.
35