Safety Clearance - Miele KM 404 Installation Instructions Manual

Safety clearance

Before installing the appliance check that the location provides the required
clearances from combustible materials and if necessary provide protection to
adjacent surfaces as required by regulations.
Shown area indicates protected surface, which may be ceramic tiles or other
approved material.
If clearance between side and rear walls and the periphery of the burner is less
than 200 mm, the walls must be protected with a non-combustible material. The
protection must be extended a minimum distance of 150 mm above the burner
(refer - gas fitting regulations).
KM 404 / KM 405 / KM 406
KM 414 / KM 417
11