Conversion to another type of gas
Changing the jets
Disconnect the gas hob from the
electricity supply. Depending on the
type of installation, either withdraw
the mains fuse, switch off at the
fused spur unit, or at the socket and
withdraw the plug.
c
d
e
f
g
^ Take off the pan support, small
burner cap b, large burner cap c,
burner collar ring d and the large
burner cap base e.
^ Use a screwdriver to unscrew the 3
screws f (M4).
30
^ Pull the control knob for the gas
burner upwards and off.
^ Use a (T20) Torx screwdriver to
unscrew the 4 Torx screws g (M4) in
the lower part of the hob housing.
^ Lift off the top part of the hob keeping
it level.