Changing The Jets - Miele KM 404 Installation Instructions Manual

Conversion to another type of gas

Changing the jets

Disconnect the gas hob from the
electricity supply. Depending on the
type of installation, either withdraw
the mains fuse, switch off at the
fused spur unit, or at the socket and
withdraw the plug.
Changing the main jets
^ Take off the pan support, the burner
cover b and the burner head d.
^ Using an (M7) socket spanner
unscrew the main jet e.
^ Change the main jet.
^ Reassemble the burner head, burner
ring and burner cover in the correct
order.
28
Changing the low setting jet
^ Guide a screwdriver through the
holes in the the lower casing of the
hob and loosen the low setting jets
f.
^ Pull the jets out with a pair of pointed
pliers.
^ Put in the new jets with a pair of
pointed pliers.
^ Secure the new jets with a
screwdriver.
Finally secure the new jets against
inadvertent loosening with sealing wax.