Table of Contents
Advertisement
Converting to another gas type
Risk of explosion due to an in-
correct conversion.
If the conversion to another type of
gas is carried out incorrectly, it may
result in gas leakage.
Conversion from one type of gas to
another must only be undertaken by
an approved and registered gas in-
staller in strict accordance with cur-
rent local and national safety and
building regulations (GasSafe in the
UK). The installer is responsible for
ensuring that the appliance functions
correctly when installed.
Jet table
The jet markings refer to a ¹/₁₀₀ mm
bore diameter.
Main jet
Natural gas H
Liquid gas
58
Simmer ad-
justment jet
1.75
0.88/0.42
Nr. 34
1.12
0.60/0.23
Nr. 7
Changing the jets
Disconnect the hob from the electri-
city supply and turn off the gas sup-
ply.
When converting to another type of
gas, both the main and small jets
need to be changed.
The upper part of the appliance has to
be removed before the jets can be
changed.
Remove the burner caps , burner
ring and burner head .
Undo the screws .
Pull the control knob off.
Advertisement
Table of Contents
