Front Brake Cable - Suzuki LT-Z90K7 Setup Manual

FRONT BRAKE CABLE

Pass the front brake cable through the hole of steering
head cover.
A: Front brake cable
B: Steering head cover
C: Hole
Turn the brake cable adjuster and lock nut in as far as
possible and align the slots.
Insert the inner cable end into the recess of brake
cable equalizer, then pull on the outer cable housing
and insert it into the adjuster.
Do not adjust at this time.
Adjustment will be covered in the SERVICING section.
NOTE:
Set the right side brake cable to the lower side
adjuster.
Before installing the cable, grease the cable
end.
A: Brake cable
B: Adjuster
C: Lock nut
D: Cable end
E: Brake cable equalizer
The procedure to install the left brake cable is identical
to that of the right.
NOTE:
Set the left side brake cable to the upper side
adjuster.
Before installing the cable, grease the cable
end.
A: Brake cable
B: Adjuster
C: Lock nut
D: Cable end
E: Brake cable equalizer
8