Verifying Sonicwave 200 Series Operation - SonicWALL SonicWave 200 Series Deployment Manual

Verifying SonicWave 200 series Operation

To verify that the SonicWave is provisioned and operational:
1 Log into your SonicWall firewall as an administrator (default: admin / password).
2 In the MANAGE view, navigate to the Connectivity | Access Points > Base Settings page.
3 In the SonicPoint/SonicWave Objects table, the Status column displays the <Short Product Name>
status. It might display Initializing, Updating Firmware, Writing Firmware, and Rebooting. After
rebooting, the Status should display Operational.
4 If the Status displays Operational (Not Licensed) and does not change to Operational soon, contact
SonicWall Support for assistance with licensing the SonicWave.
5 Connect a client device to the SonicWave by selecting the appropriate access point name (SSID).
6 Ensure that the client device is not connected to any other network connections (wired LAN, 3G/4G
WWAN).
7 In a browser, enter "https://www.sonicwall.com/" in the address bar and press Enter. The SonicWall
website should display. If you are unable to browse to a website, refer to Troubleshooting.
SonicWall SonicWave Deployment Guide
Verifying Operation
81